دانلود نرم افزارهای تخصصی مهندسی آب و فاضلاب و محیط زیست

[M@hdi42]

---

نرم افزار Elite Software DPipe V2.00.8
منبع

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

Elite DPipe is a program that computes optimal pipe sizes for waste drainage systems in both residential and commercial buildings. DPipe can handle systems with virtually unlimited numbers of pipes. Besides computing pipe sizes, DPipe can also perform a system analysis complete with a bill of materials and labor estimate.

Using the Elite Software Waste Drainage Pipe Sizing Program DPipe, you can evaluate pipe sizes, fixture units, and stack and vent sizes in waste drainage piping systems. DPipe provides an intuitive program interface with on-line help and dynamic error checking, making it practical and easy to use. All the information you enter into DPipe is checked for correctness, and calculation results are returned so DPipe can create nicely formatted, useful output, including a list of pipe size results and a bill of materials.

The equations used in DPipe calculations are developed from the procedure described in the 2000 Uniform Plumbing Code and the International Plumbing Code 2000, with some references to 1984 BOCA Basic/National Plumbing Code and ASPE drainage pipe sizing procedures. The program employs a unique table look-up approach in computing optimal pipe sizes. This approach allows the program to obtain exactly the same results that you would obtain manually. Therefore, the output can be quickly and easily verified by hand so that you can have the utmost confidence and assurance in the program output. The DPipe user's manual contains more details on the calculation procedure, demonstrating with an input example.

لینک دانلود:
http://www.4shared.com/file/14902273...ipe_v2008.html

[M@hdi42]

نرم افزار محاسبات هیدرولوژی HydroWorks 1.0
منبع

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

HydroWorks is a Storm Water analysis software using Rational Method for calculations. Prior to calculations, a storm drainage system is entered to the program graphically. Overland flow, Shallow concentrated flow and channel flow can be added. Addition of each type of flow is limited to twenty different sub-basins.

لینک دانلود:
http://www.4shared.com/file/15172419...472/Hywo1.html
کرک از پیوست
پسوورد:
AQClan

[M@hdi42]

---

Watercom Pipes Plus Plus V2005.8
منبع

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

PIPES++ is a program that does Single Balance or Extended Period Simulations of flow and water quality in a town water supply system. Components that can be modelled include:
• Reservoirs
• Pipes
• Pumping Stations
• Minor Head Losses
• Check Valves
• Reservoir Inlet Control Valves
• Various specialised control valves
• Pressure Reducing Valves
• Pressure Sustaining Valves
• Flow Control Valves
• Sprinklers
Pipe flows may be calculated using either the Colebrook White equation or the Hazen Williams equation. You draw the network on screen using lines to represent pipes and pre defined symbols to represent pumps, valves, reservoirs etc. If you already have the pipes drawn in a CAD system (eg Autocad) you can create a DXF file directly from that.

لینک دانلود:
http://dc172.4shared.com/download/14...-014130-940285

یا
http://www.4shared.com/file/14739647...us_v20058.html

[M@hdi42]

---

نرم افزار PipeSupport PRO 3.1.5.5
منبع

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

توضیحات:
The object of PipeSUPPORT PRO is to enable the easy selection, design and numbering of pipe supports and to make it simple to find the details of a particular support given that the number is to hand.

Annexed my trial renew. Apply from every folder but keep ther two files in the same folder when running.

لینک دانلود:
http://dl.dropbox.com/u/6330477/lera...%203.1.5.5.exe
یا
http://www.fileden.com/files/2010/8/...%203.1.5.5.rar
پسورد :
www.civilstars.com

[M@hdi42]

نرم افزار HEC-RAS يكي از سري مدلهاي Hydrologic Engineering Center است كه جهت رونديابي جريان در رودخانه قابل استفاده مي باشد. اين مدل بسيار ساده و در عين حال كاربردي است. مدل فوق رونديابي در رودخانه را هم در حالت جريان ماندگار و هم غير ماندگار را انجام مي دهد. چند شاخه‌اي شدن آبراهه ها را نيز در اين مدل مي توان تعريف كرد. علاوه بر اين مي توان در اين مدل در صورت وجود هرگونه سازه هاي آبي شامل پل، بند، سد، آبگذر(كالورت) و .... را به مدل تعريف و اضافه نمود و تاثير آن را در رونديابي مشاهده نمود. در مقايسه با مدل MIKE11 كه يكي از قسمتهاي آن مدلسازي هيدروليكي است بسيار ساده و كاربردي تر است. هرچند كه مدل MIKE11 تا حدودي داراي دقت بيشتري نسبت به HEC-RAS است در عين حال مي توان به اين مدل اعتماد كرد. از خروجيهاي مدل فوق مي توان به تغييرات پروفيل سطح آب در دبي هاي با دوره بازگشتهاي مختلف در بازه هاي مورد نظر در رودخانه، مقادير سرعت جريان، عمق نرمال، عمق بحراني، و خصوصيات و پارامترهاي هيدروليكي در رودخانه اشاره كرد. وروديهاي مدل شامل مقاطع عرضي آبراهه، ضرايب زبري (در اين بخش مي توان ضرايب زبري مختلفي را در يك مقطع عرضي با توجه به تغييرات عمق و شكل مقطع تعريف كرد) و دبي هاي طرح در دوره بازگشتهاي مختلف و فاصله بين مقاطع است.

لینک دانلود برنامه : http://www.4shared.com/file/n4YPRL-u...313_Setup.html

[M@hdi42]

---

Aquaveo GMS 7
http://forum.civilea.com/showthread....52146#pid52146
info:
The Groundwater Modeling System (GMS) is a comprehensive
groundwater modeling environment. GMS provides GIS based
graphical preprocessing tools to automate and streamline
the modeling process. GMS interfaces with MODFLOW and
several other standard groundwater models, and provides
advanced graphical features for viewing and calibrating
model results. With thousands of users at U.S. and foreign
government agencies, private firms, and universities, GMS
has proven to be the modeling system of choice for
groundwater professionals.

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

http://rapidshare.com/files/30813830...S.v7.part1.rar
http://rapidshare.com/files/30778016...S.v7.part2.rar
RAR Password: FromCivilEA

[M@hdi42]

---

Aquaveo GMS v7.1.3.0
http://forum.civilea.com/showthread....52146#pid52146
The Groundwater Modeling System (GMS) is a comprehensive groundwater modeling environment. GMS provides GIS based graphical preprocessing tools to automate and streamline the modeling process. GMS interfaces with MODFLOW and several other standard groundwater models, and provides advanced graphical features for viewing and calibrating model results. With thousands of users at U.S. and foreign government agencies, private firms, and universities, GMS has proven to be the modeling system of choice for groundwater professionals.

The Groundwater Modeling System (GMS) is a comprehensive graphical user environment for performing groundwater simulations. The entire GMS system consists of a graphical user interface (the GMS program) and a number of analysis codes (MODFLOW, MT3DMS, etc.). GMS is used as a preprocessor to graphically create numerical models, and as a post processor to import and visualize model results.GMS uses a Conceptual Modeling Approach to create and manage numerical models using GIS based objects. Other powerful GMS features include 3D Model Conceptualization, Site Visualization, Advanced Geostatistics, Automated Calibration, and Stochastic Modeling. GMS also has advanced tools for Data Import, Data Export and Data Visualization and Animation.

GMS Features:-
• Conceptual Model Approach
• 3D Model Conceptualization
• Site Characterisation & Visualization
• Geostatistics
• Model Calibration
• Stochastic Modeling
• Visualization & Animation
• Data Import
• Data Export

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

http://hotfile.com/dl/49701304/cc1a4....3.0.part1.rar
http://hotfile.com/dl/49701321/e7f8c....3.0.part2.rar

[M@hdi42]

---

Aquaveo GMS v7.1.9 | 241 Mb
http://forum.civilea.com/showthread....52146#pid52146
Download

کد:

http://www.filesonic.com/file/582228...BEAN.part1.rar http://www.filesonic.com/file/582228...BEAN.part2.rar http://www.filesonic.com/file/582227...BEAN.part3.rar http://www.unibytes.com/YYz9WNjk7SoB - Aquaveo.GMS.v7.1.9-BEAN.part1.rar http://www.unibytes.com/ptl5_yupHywB - Aquaveo.GMS.v7.1.9-BEAN.part2.rar http://www.unibytes.com/7zXtTTxZxMMB - Aquaveo.GMS.v7.1.9-BEAN.part3.rar

[M@hdi42]

---

[B]

[align=center]Bentley WaterCAD V8i (SelectSERIES 1) 08.11.01.32
http://forum.civilea.com/showthread....53130#pid53130
Water Distribution Modeling and Management
Model hydraulics, operations, fire flow, criticality, and water quality with ease using your favorite environment.
WaterCAD is an easy-to-use hydraulic and water quality modeling solution for water distribution systems. It features advanced interoperability, model building, optimization, and asset management tools. From fire-flow and constituent-concentration analyses, to energy-consumption and capital-cost management, WaterCAD helps engineers and utilities analyze, design, and optimize water distribution systems. Water utilities, municipalities and design engineering firms trust WaterCAD as a reliable, resource-saving, decision-support tool for their water infrastructure. They depend upon its robust hydraulic analysis, practical model management, eloquent result interpretation
tools, and unrivaled ease of use.

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

ftp://ftp2.bentley.com/dist2/intel/v...08110132en.exe

Medicine (the password is for this file only)
http://rapidshare.com/files/406645183/WC8.rar
PASSWORD: FromCivilEA
Mirror Links:
http://www.filesonic.com/file/643695...08110132en.exe
or
http://www.fileserve.com/file/DFqMuc...08110132en.exe

Medicine:
http://www.filesonic.com/file/64368815/WC8.rar
Password: FromCivilEA
as per request mirror to med!c!ne
http://ifile.it/cq8w7o5/WC8_www.civilea.com.rar
or
http://www.mediafire.com/file/ctnxv4...ivilea.com.rar
or
http://hotfile.com/dl/127243893/b80b...a.com.rar.html
or
http://www.4shared.com/file/QYQRL4u-...ivileacom.html
password: FromCivilEA
Mirror Links:
http://www.filesonic.com/file/643695...08110132en.exe
or
http://www.fileserve.com/file/DFqMuc...08110132en.exe
as per request mirror to med!c!ne
http://ifile.it/cq8w7o5/WC8_www.civilea.com.rar
or
http://www.mediafire.com/file/ctnxv4...ivilea.com.rar
or
http://hotfile.com/dl/127243893/b80b...a.com.rar.html
or
http://www.4shared.com/file/QYQRL4u-...ivileacom.html
password: FromCivilEA

[M@hdi42]

---

Steel Water Pipe 2007
http://forum.civilea.com/showthread....53735#pid53735
The computer program SteelWaterPipe has been developed to facilitate the design of fabricated steel pipe in accord with AWWA M11 (1989) or AISI Welded Steel Pipe Volume 3 (1996). The program has been written to run on Windows 95, Windows 98, Windows 2000, Windows XP, Vista and the latest versions of Windows NT operating systems.
The Program consists of three main modules and nine secondary modules. The three main modules are primarily design modules. These modules are for Hydraulic Design of Pipe, Design of Above Ground Pipe Installations, and Design of Buried Pipes. The secondary modules have been arranged in nine modules of similar subject matter. They are used to analyze some special aspect of pipe design such as required size of weld, distance between expansion joints etc. Some secondary modules contain two or three subtopics to select from. The user selects the desired module from the Main Screen menu by clicking on the Toolbar Buttons or by selecting File Menu and then New Project Item and then clicking on the Icon of the module.
The modules are interactive with input data boxes provided for all needed data. After entering the required data for the given module the user can click on the Calculate Button to see the results of the analysis or design calculations. The results of an interactive calculation can be printed directly by clicking on the Print Button or may be saved on a file by clicking on the Save Button for subsequent editing and printing. In addition to the Calculate Button each module is supplied with a Refresh Button and a Cancel Button. By clicking on Refresh Button the input data, in the input boxes will be erased. To return to Main Screen when finished, click on the Cancel Button. After returning to Main Screen the user may select another module to continue the design process. To edit a file click on the Open Project Button on the Tool Bar or click on the File Menu and then on Open Project Item .The file would open in the appropriate module then edit the file as required.
Several proposed (at the time of software development) revisions to M11 (1989) to be included in M11 (2000) have been implemented in the software. They include updating of E' (modulus of soil reaction), steel properties tables and an expanded thrust restraint section.

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

بند انگشتی, برای دیدن عکس به صورت کامل بر روی آن کلیک نمایید

http://rapidshare.com/files/309634484/SteelWP.rar.html
Pass: FromCivilEA